zener/lvgl_esp32_drivers
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

Update with epdiy last version support

Browse source
This commit is contained in:
martinberlin 2023-08-24 12:45:30 +02:00
parent d738aaa84f
commit 87bf29d676
56 changed files with 1844 additions and 859 deletions
Download patch file Download diff file Expand all files Collapse all files

39
lvgl_tft/ra8875.c
View file

@ -148,18 +148,29 @@ void ra8875_init(void)
ESP_LOGI(TAG, "Initializing RA8875...");
// Initialize non-SPI GPIOs
#if (CONFIG_LV_DISP_PIN_BCKL == 15)
gpio_config_t io_conf;
io_conf.intr_type = GPIO_PIN_INTR_DISABLE;
io_conf.mode = GPIO_MODE_OUTPUT;
io_conf.pin_bit_mask = GPIO_SEL_15;
io_conf.pull_down_en = GPIO_PULLDOWN_DISABLE;
io_conf.pull_up_en = GPIO_PULLUP_DISABLE;
gpio_config(&io_conf);
#endif
#if RA8875_USE_RST
// Initialize non-SPI GPIOs
gpio_pad_select_gpio(RA8875_RST);
gpio_set_direction(RA8875_RST, GPIO_MODE_OUTPUT);
#ifdef CONFIG_LV_DISP_PIN_BCKL
gpio_pad_select_gpio(CONFIG_LV_DISP_PIN_BCKL);
gpio_set_direction(CONFIG_LV_DISP_PIN_BCKL, GPIO_MODE_OUTPUT);
#endif
// Reset the RA8875
gpio_set_level(RA8875_RST, 0);
vTaskDelay(DIV_ROUND_UP(100, portTICK_RATE_MS));
gpio_set_level(RA8875_RST, 1);
vTaskDelay(DIV_ROUND_UP(100, portTICK_RATE_MS));
#endif
// Initalize RA8875 clocks (SPI must be decelerated before initializing clocks)
disp_spi_change_device_speed(SPI_CLOCK_SPEED_SLOW_HZ);
@ -183,8 +194,28 @@ void ra8875_init(void)
ESP_LOGW(TAG, "WARNING: Memory clear timed out; RA8875 may be unresponsive.");
}
// Enable the display
// Enable the display and backlight
ra8875_enable_display(true);
ra8875_enable_backlight(true);
}
void ra8875_enable_backlight(bool backlight)
{
#if CONFIG_LV_ENABLE_BACKLIGHT_CONTROL
ESP_LOGI(TAG, "%s backlight.", backlight ? "Enabling" : "Disabling");
uint32_t tmp = 0;
#if CONFIG_LV_BACKLIGHT_ACTIVE_LVL
tmp = backlight ? 1 : 0;
#else
tmp = backlight ? 0 : 1;
#endif
#ifdef CONFIG_LV_DISP_PIN_BCKL
gpio_set_level(CONFIG_LV_DISP_PIN_BCKL, tmp);
#endif
#endif
}
void ra8875_enable_display(bool enable)