zener/lvgl_esp32_drivers
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

fix SPI names for touch

Browse source 
with ESP32-C3 specific auto-dma proper selection
This commit is contained in:
arktrin 2021-12-18 20:54:50 +03:00 • committed by Carlos Diaz
parent 762bb35265
commit 8cbbc299e9
5 changed files with 65 additions and 94 deletions
Download patch file Download diff file Expand all files Collapse all files

89
lvgl_touch/Kconfig
View file

@ -1,28 +1,28 @@
menu "LVGL Touch controller"
config LV_TOUCH_CONTROLLER
int
default 0 if LV_TOUCH_CONTROLLER_NONE
default 1 if LV_TOUCH_CONTROLLER_XPT2046
default 2 if LV_TOUCH_CONTROLLER_FT6X06
default 3 if LV_TOUCH_CONTROLLER_STMPE610
int
default 0 if LV_TOUCH_CONTROLLER_NONE
default 1 if LV_TOUCH_CONTROLLER_XPT2046
default 2 if LV_TOUCH_CONTROLLER_FT6X06
default 3 if LV_TOUCH_CONTROLLER_STMPE610
default 4 if LV_TOUCH_CONTROLLER_ADCRAW
default 5 if LV_TOUCH_CONTROLLER_FT81X
default 6 if LV_TOUCH_CONTROLLER_RA8875
default 7 if LV_TOUCH_CONTROLLER_GT911
choice
prompt "Select a touch panel controller model."
default LV_TOUCH_CONTROLLER_NONE
help
Select the controller for your touch panel.
prompt "Select a touch panel controller model."
default LV_TOUCH_CONTROLLER_NONE
help
Select the controller for your touch panel.
config LV_TOUCH_CONTROLLER_NONE
bool "None"
config LV_TOUCH_CONTROLLER_XPT2046
config LV_TOUCH_CONTROLLER_NONE
bool "None"
config LV_TOUCH_CONTROLLER_XPT2046
select LV_TOUCH_DRIVER_PROTOCOL_SPI
bool "XPT2046"
config LV_TOUCH_CONTROLLER_FT6X06
config LV_TOUCH_CONTROLLER_FT6X06
select LV_I2C_TOUCH
bool "FT6X06"
config LV_TOUCH_CONTROLLER_STMPE610
@ -61,23 +61,20 @@ menu "LVGL Touch controller"
bool
help
Touch controller uses same interface/device as display
(Note: Display must be initialized before touch)
(Note: Display must be initialized before touch)
choice
prompt "Touch Controller SPI Bus."
depends on LV_TOUCH_DRIVER_PROTOCOL_SPI
default LV_TOUCH_CONTROLLER_SPI_VSPI if !IDF_TARGET_ESP32S2
default LV_TOUCH_CONTROLLER_SPI_FSPI if IDF_TARGET_ESP32S2
default LV_TOUCH_CONTROLLER_SPI2_HOST
help
Select the SPI Bus the TFT Display is attached to.
Select the SPI Bus the touch controller is attached to.
config LV_TOUCH_CONTROLLER_SPI_HSPI
bool "HSPI"
config LV_TOUCH_CONTROLLER_SPI_VSPI
bool "VSPI" if !IDF_TARGET_ESP32S2
config LV_TOUCH_CONTROLLER_SPI_FSPI
bool "FSPI" if IDF_TARGET_ESP32S2
config LV_TOUCH_CONTROLLER_SPI2_HOST
bool "SPI2_HOST"
config LV_TOUCH_CONTROLLER_SPI3_HOST
bool "SPI3_HOST"
endchoice
menu "Touchpanel (XPT2046) Pin Assignments"
@ -86,7 +83,7 @@ menu "LVGL Touch controller"
config LV_TOUCH_SPI_MISO
int
prompt "GPIO for MISO (Master In Slave Out)"
default 35 if LV_PREDEFINED_PINS_38V1
default 19
help
@ -103,7 +100,7 @@ menu "LVGL Touch controller"
config LV_TOUCH_SPI_CLK
int "GPIO for CLK (SCK / Serial Clock)"
default 26 if LV_PREDEFINED_PINS_38V1
default 18
help
@ -119,7 +116,7 @@ menu "LVGL Touch controller"
config LV_TOUCH_PIN_IRQ
int "GPIO for IRQ (Interrupt Request)"
default 27 if LV_PREDEFINED_PINS_38V4
default 25
help
@ -153,10 +150,10 @@ menu "LVGL Touch controller"
default 4095 if LV_PREDEFINED_PINS_38V4
default 1900
config LV_TOUCH_XY_SWAP
bool
prompt "Swap XY."
default y
config LV_TOUCH_XY_SWAP
bool
prompt "Swap XY."
default y
config LV_TOUCH_INVERT_X
bool
@ -216,7 +213,7 @@ menu "LVGL Touch controller"
config LV_TOUCH_SPI_MISO
int
prompt "GPIO for MISO (Master In Slave Out)"
default 35 if LV_PREDEFINED_PINS_38V1
default 19 if LV_PREDEFINED_DISPLAY_ADA_FEATHERWING
default 19
@ -278,9 +275,9 @@ menu "LVGL Touch controller"
default 3800
config LV_TOUCH_XY_SWAP
bool
prompt "Swap XY."
default n
bool
prompt "Swap XY."
default n
config LV_TOUCH_INVERT_X
bool
@ -379,25 +376,25 @@ menu "LVGL Touch controller"
config LV_TOUCH_X_MIN
int
prompt "Minimum X coordinate ADC value"
range 0 1023
range 0 1023
default 0
config LV_TOUCH_Y_MIN
int
prompt "Minimum Y coordinate ADC value"
range 0 1023
range 0 1023
default 0
config LV_TOUCH_X_MAX
int
prompt "Maximum X coordinate ADC value"
range 0 1023
range 0 1023
default 1023
config LV_TOUCH_Y_MAX
int
prompt "Maximum Y coordinate ADC value"
range 0 1023
range 0 1023
default 1023
config LV_TOUCH_XY_SWAP
@ -418,13 +415,13 @@ menu "LVGL Touch controller"
config LV_TOUCH_RA8875_SAMPLE_TIME
int
prompt "TP Sample Time Adjusting"
range 0 7
range 0 7
default 0
config LV_TOUCH_RA8875_ADC_CLOCK
int
prompt "ADC Clock Setting"
range 0 7
range 0 7
default 0
config LV_TOUCH_RA8875_WAKEUP_ENABLE
@ -447,10 +444,10 @@ menu "LVGL Touch controller"
menu "Touchpanel Configuration (GT911)"
depends on LV_TOUCH_CONTROLLER_GT911
config LV_GT911_SWAPXY
bool
prompt "Swap X with Y coordinate."
default y
config LV_GT911_SWAPXY
bool
prompt "Swap X with Y coordinate."
default y
config LV_GT911_INVERT_X
bool
@ -472,14 +469,14 @@ menu "LVGL Touch controller"
config LV_I2C_TOUCH_PORT_0
bool
prompt "I2C port 0"
help
help
I2C is shared peripheral managed by I2C Manager. In order to configure I2C Manager (pinout, etc.) see menu
Component config->I2C Port Settings.
config LV_I2C_TOUCH_PORT_1
bool
prompt "I2C port 1"
help
help
I2C is shared peripheral managed by I2C Manager. In order to configure I2C Manager (pinout, etc.) see menu
Component config->I2C Port Settings.