lvgl_esp32_drivers/lvgl_tft/epdiy_epaper.cpp

#include "esp_log.h"
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"

#include "epdiy_epaper.h"

#include "epd_driver.h"
#include "epd_highlevel.h"

/*********************
 *      DEFINES
 *********************/
#define TAG "EPDIY"
EpdiyHighlevelState hl;
uint16_t flushcalls = 0;
uint8_t * framebuffer;
uint8_t temperature = 25;

/* Display initialization routine */
void epdiy_init(void)
{
    epd_init(EPD_OPTIONS_DEFAULT);
    hl = epd_hl_init(EPD_BUILTIN_WAVEFORM);
    framebuffer = epd_hl_get_framebuffer(&hl);    
    epd_fullclear(&hl, temperature);
    epd_poweron();
}

uint16_t xo = 0;
uint16_t yo = 0;

/* Required by LVGL */
void epdiy_flush(lv_disp_drv_t *drv, const lv_area_t *area, lv_color_t *color_map)
{
    ++flushcalls;
    xo = area->x1;
    yo = area->y1;
    uint16_t w = lv_area_get_width(area);
    uint16_t h = lv_area_get_height(area);

    EpdRect update_area = {
        .x = xo,
        .y = yo,
        .width = w,
        .height = h,
    };

    // Debug test: Draw box x:232 y:78 w:496 h:198. Flush coords are correct:
    /* EpdRect rect_area = {
        .x = 232,
        .y = 78,
        .width = 496,
        .height = 198,
    };
    epd_draw_rect(rect_area, 0, framebuffer); */
    epd_hl_update_area(&hl, MODE_GC16, temperature, update_area); //update_area

    printf("epdiy_flush %d x:%d y:%d w:%d h:%d\n", flushcalls,xo,yo,w,h);
    /* Inform the graphics library that you are ready with the flushing */
    lv_disp_flush_ready(drv);
}

/* 
 * Called for each pixel. Designed with the idea to fill the buffer directly, not to set each pixel, see:
 * https://forum.lvgl.io/t/lvgl-port-to-be-used-with-epaper-displays/5630/3
*/
void epdiy_set_px_cb(lv_disp_drv_t * disp_drv, uint8_t* buf,
    lv_coord_t buf_w, lv_coord_t x, lv_coord_t y,
    lv_color_t color, lv_opa_t opa)
{
    // Debug where x y is printed, not all otherwise is too much Serial
    /* if ((int16_t)y%10==0 && flushcalls>0){
        if ((int16_t)x%2==0){
            printf("x%d y%d\n", (int16_t)x, (int16_t)y);
        }
    }
    */

    // Test using RGB232
    int16_t epd_color = 255;

    // Color setting use: RGB232
    if ((int16_t)color.full<250) {
        epd_color = (int16_t)color.full/3;
    }

    int16_t x1 = (int16_t)x;
    int16_t y1 = (int16_t)y;
    // Add offsets from last flush test. Why is drawing in wrong place?
    // Bad idea: But is just writing in different area. And I don't understand why:
    /* if (flushcalls>0) {
        x1 = x1 + xo;
        y1 = y1 + yo;
    } */
    epd_draw_pixel(x1, y1, epd_color, framebuffer);
}