lvgl_esp32_drivers/lvgl_tft/sh1107.c

/**
 * @file sh1107.c
 *
 */

/*********************
 *      INCLUDES
 *********************/
#include "sh1107.h"
#include "disp_spi.h"
#include "driver/gpio.h"
#include "esp_log.h"
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"

/*********************
 *      DEFINES
 *********************/
 #define TAG "SH1107"

/**********************
 *      TYPEDEFS
 **********************/

/*The LCD needs a bunch of command/argument values to be initialized. They are stored in this struct. */
typedef struct {
    uint8_t cmd;
    uint8_t data[16];
    uint8_t databytes; //No of data in data; bit 7 = delay after set; 0xFF = end of cmds.
} lcd_init_cmd_t;

/**********************
 *  STATIC PROTOTYPES
 **********************/
static void sh1107_send_cmd(uint8_t cmd);
static void sh1107_send_data(void * data, uint16_t length);
static void sh1107_send_color(void * data, uint16_t length);

/**********************
 *  STATIC VARIABLES
 **********************/

/**********************
 *      MACROS
 **********************/

#define BIT_SET(a,b) ((a) |= (1U<<(b)))
#define BIT_CLEAR(a,b) ((a) &= ~(1U<<(b)))

/**********************
 *   GLOBAL FUNCTIONS
 **********************/

void sh1107_init(void)
{
    // Use Double Bytes Commands if necessary, but not Command+Data
    // Initialization taken from https://github.com/nopnop2002/esp-idf-m5stick
	lcd_init_cmd_t init_cmds[]={
    	{0xAE, {0}, 0},	// Turn display off
    	{0xDC, {0}, 0},	// Set display start line
    	{0x00, {0}, 0},	// ...value
    	{0x81, {0}, 0},	// Set display contrast
    	{0x2F, {0}, 0},	// ...value
    	{0x20, {0}, 0},	// Set memory mode
    	{0xA0, {0}, 0},	// Non-rotated display
#if defined CONFIG_LV_DISPLAY_ORIENTATION_LANDSCAPE
    	{0xC8, {0}, 0},	// flipped vertical
#elif defined CONFIG_LV_DISPLAY_ORIENTATION_PORTRAIT
    	{0xC7, {0}, 0},	// flipped vertical
#endif
    	{0xA8, {0}, 0},	// Set multiplex ratio
    	{0x7F, {0}, 0},	// ...value
    	{0xD3, {0}, 0},	// Set display offset to zero
    	{0x60, {0}, 0},	// ...value
    	{0xD5, {0}, 0},	// Set display clock divider
    	{0x51, {0}, 0},	// ...value
    	{0xD9, {0}, 0},	// Set pre-charge
    	{0x22, {0}, 0},	// ...value
    	{0xDB, {0}, 0},	// Set com detect
    	{0x35, {0}, 0},	// ...value
    	{0xB0, {0}, 0},	// Set page address
    	{0xDA, {0}, 0},	// Set com pins
    	{0x12, {0}, 0},	// ...value
    	{0xA4, {0}, 0},	// output ram to display
#if defined CONFIG_LV_INVERT_COLORS
    	{0xA7, {0}, 0},	// inverted display
#else
    	{0xA6, {0}, 0},	// Non-inverted display
#endif
    	{0xAF, {0}, 0},	// Turn display on
        {0, {0}, 0xff},
	};

	//Initialize non-SPI GPIOs
        gpio_pad_select_gpio(SH1107_DC);
	gpio_set_direction(SH1107_DC, GPIO_MODE_OUTPUT);

#if SH1107_USE_RST
        gpio_pad_select_gpio(SH1107_RST);
	gpio_set_direction(SH1107_RST, GPIO_MODE_OUTPUT);

	//Reset the display
	gpio_set_level(SH1107_RST, 0);
	vTaskDelay(100 / portTICK_DELAY_MS);
	gpio_set_level(SH1107_RST, 1);
	vTaskDelay(100 / portTICK_DELAY_MS);
#endif

	//Send all the commands
	uint16_t cmd = 0;
	while (init_cmds[cmd].databytes!=0xff) {
	    sh1107_send_cmd(init_cmds[cmd].cmd);
	    sh1107_send_data(init_cmds[cmd].data, init_cmds[cmd].databytes&0x1F);
	    if (init_cmds[cmd].databytes & 0x80) {
		vTaskDelay(100 / portTICK_DELAY_MS);
	    }
	    cmd++;
	}
}

void sh1107_set_px_cb(struct _disp_drv_t * disp_drv, uint8_t * buf, lv_coord_t buf_w, lv_coord_t x, lv_coord_t y,
        lv_color_t color, lv_opa_t opa)
{
	/* buf_w will be ignored, the configured CONFIG_LV_DISPLAY_HEIGHT and _WIDTH,
	   and CONFIG_LV_DISPLAY_ORIENTATION_LANDSCAPE and _PORTRAIT will be used. */
    uint16_t byte_index = 0;
    uint8_t  bit_index = 0;

#if defined CONFIG_LV_DISPLAY_ORIENTATION_LANDSCAPE
	byte_index = y + (( x>>3 ) * LV_VER_RES_MAX);
	bit_index  = x & 0x7;
#elif defined CONFIG_LV_DISPLAY_ORIENTATION_PORTRAIT
    byte_index = x + (( y>>3 ) * LV_HOR_RES_MAX);
    bit_index  = y & 0x7;
#endif

    if ((color.full == 0) && (LV_OPA_TRANSP != opa)) {
        BIT_SET(buf[byte_index], bit_index);
    } else {
        BIT_CLEAR(buf[byte_index], bit_index);
    }
}

void sh1107_flush(lv_disp_drv_t * drv, const lv_area_t * area, lv_color_t * color_map)
{
    uint8_t columnLow = area->x1 & 0x0F;
	uint8_t columnHigh = (area->x1 >> 4) & 0x0F;
    uint8_t row1 = 0, row2 = 0;
    uint32_t size = 0;
    void *ptr;

#if defined CONFIG_LV_DISPLAY_ORIENTATION_LANDSCAPE
    row1 = area->x1>>3;
    row2 = area->x2>>3;
#else
    row1 = area->y1>>3;
    row2 = area->y2>>3;
#endif
    for(int i = row1; i < row2+1; i++){
	    sh1107_send_cmd(0x10 | columnHigh);         // Set Higher Column Start Address for Page Addressing Mode
	    sh1107_send_cmd(0x00 | columnLow);          // Set Lower Column Start Address for Page Addressing Mode
	    sh1107_send_cmd(0xB0 | i);                  // Set Page Start Address for Page Addressing Mode
	    size = area->y2 - area->y1 + 1;
#if defined CONFIG_LV_DISPLAY_ORIENTATION_LANDSCAPE
        ptr = color_map + i * LV_VER_RES_MAX;
#else
        ptr = color_map + i * LV_HOR_RES_MAX;
#endif
        if(i != row2){
	    sh1107_send_data( (void *) ptr, size);
	} else {
	    // complete sending data by sh1107_send_color() and thus call lv_flush_ready()
	    sh1107_send_color( (void *) ptr, size);
	}
    }
}

void sh1107_rounder(struct _disp_drv_t * disp_drv, lv_area_t *area)
{
    // workaround: always send complete size display buffer
    area->x1 = 0;
    area->y1 = 0;
    area->x2 = LV_HOR_RES_MAX-1;
    area->y2 = LV_VER_RES_MAX-1;
}

void sh1107_sleep_in()
{
    sh1107_send_cmd(0xAE);
}

void sh1107_sleep_out()
{
    sh1107_send_cmd(0xAF);
}

/**********************
 *   STATIC FUNCTIONS
 **********************/


static void sh1107_send_cmd(uint8_t cmd)
{
    disp_wait_for_pending_transactions();
    gpio_set_level(SH1107_DC, 0);	 /*Command mode*/
    disp_spi_send_data(&cmd, 1);
}

static void sh1107_send_data(void * data, uint16_t length)
{
    disp_wait_for_pending_transactions();
    gpio_set_level(SH1107_DC, 1);	 /*Data mode*/
    disp_spi_send_data(data, length);
}

static void sh1107_send_color(void * data, uint16_t length)
{
    disp_wait_for_pending_transactions();
    gpio_set_level(SH1107_DC, 1);   /*Data mode*/
    disp_spi_send_colors(data, length);
}