diff --git a/.gitignore b/.gitignore
index c6127b3..38eeab7 100644
--- a/.gitignore
+++ b/.gitignore
@@ -50,3 +50,9 @@ modules.order
 Module.symvers
 Mkfile.old
 dkms.conf
+
+# MacOS
+.DS_Store
+
+# ESP-IDF build dir
+build
diff --git a/lvgl_tft/EVE_commands.h b/lvgl_tft/EVE_commands.h
index 7377a7f..aa9d061 100644
--- a/lvgl_tft/EVE_commands.h
+++ b/lvgl_tft/EVE_commands.h
@@ -68,7 +68,7 @@ void EVE_get_cmdoffset(void);
 /* commands to operate on memory: */
 void EVE_cmd_memzero(uint32_t ptr, uint32_t num);
 void EVE_cmd_memset(uint32_t ptr, uint8_t value, uint32_t num);
-void EVE_cmd_memwrite(uint32_t dest, uint32_t num, const uint8_t *data); 
+void EVE_cmd_memwrite(uint32_t dest, uint32_t num, const uint8_t *data);
 void EVE_cmd_memcpy(uint32_t dest, uint32_t src, uint32_t num);
 
 #if FT81X_FULL
diff --git a/lvgl_tft/FT81x.c b/lvgl_tft/FT81x.c
index 4afc52b..63e0dee 100644
--- a/lvgl_tft/FT81x.c
+++ b/lvgl_tft/FT81x.c
@@ -250,7 +250,7 @@ void TFT_bitmap_display(void)
 		EVE_cmd_dl(TAG(0));
 
 		EVE_cmd_dl(DL_DISPLAY);	/* instruct the graphics processor to show the list */
-		
+
 		EVE_cmd_dl(CMD_SWAP); /* make this list active */
 
 		EVE_end_cmd_burst(); /* stop writing to the cmd-fifo */
@@ -273,7 +273,7 @@ void FT81x_init(void)
 #endif
 
 	spi_acquire();
-	
+
 	if(EVE_init())
 	{
 		tft_active = 1;
@@ -284,7 +284,7 @@ void FT81x_init(void)
 
 		EVE_cmd_memset(SCREEN_BITMAP_ADDR, BLACK, SCREEN_BUFFER_SIZE);		// clear screen buffer
 		EVE_cmd_execute();
-		
+
 		TFT_bitmap_display();	// set DL for fullscreen bitmap display
 	}
 
@@ -326,4 +326,4 @@ void TFT_WriteBitmap(uint8_t* Bitmap, uint16_t X, uint16_t Y, uint16_t Width, ui
 void FT81x_flush(lv_disp_drv_t * drv, const lv_area_t * area, lv_color_t * color_map)
 {
 	TFT_WriteBitmap((uint8_t*)color_map, area->x1, area->y1, lv_area_get_width(area), lv_area_get_height(area));
-}
\ No newline at end of file
+}
diff --git a/lvgl_tft/GC9A01.c b/lvgl_tft/GC9A01.c
index 525efc9..6f32051 100644
--- a/lvgl_tft/GC9A01.c
+++ b/lvgl_tft/GC9A01.c
@@ -173,7 +173,7 @@ void GC9A01_flush(lv_disp_drv_t * drv, const lv_area_t * area, lv_color_t * colo
 	uint8_t data[4];
 
 	/*Column addresses*/
-	GC9A01_send_cmd(0x2A);				//0x2A 
+	GC9A01_send_cmd(0x2A);				//0x2A
 	data[0] = (area->x1 >> 8) & 0xFF;
 	data[1] = area->x1 & 0xFF;
 	data[2] = (area->x2 >> 8) & 0xFF;
@@ -181,7 +181,7 @@ void GC9A01_flush(lv_disp_drv_t * drv, const lv_area_t * area, lv_color_t * colo
 	GC9A01_send_data(data, 4);
 
 	/*Page addresses*/
-	GC9A01_send_cmd(0x2B);				//0x2B 
+	GC9A01_send_cmd(0x2B);				//0x2B
 	data[0] = (area->y1 >> 8) & 0xFF;
 	data[1] = area->y1 & 0xFF;
 	data[2] = (area->y2 >> 8) & 0xFF;
@@ -189,7 +189,7 @@ void GC9A01_flush(lv_disp_drv_t * drv, const lv_area_t * area, lv_color_t * colo
 	GC9A01_send_data(data, 4);
 
 	/*Memory write*/
-	GC9A01_send_cmd(0x2C);				//0x2C 
+	GC9A01_send_cmd(0x2C);				//0x2C
 
 
 	uint32_t size = lv_area_get_width(area) * lv_area_get_height(area);
@@ -217,7 +217,7 @@ void GC9A01_sleep_in()
 {
 	uint8_t data[] = {0x08};
 	GC9A01_send_cmd(0x10);			//0x10 Enter Sleep Mode
-	GC9A01_send_data(&data, 1);		
+	GC9A01_send_data(&data, 1);
 }
 
 void GC9A01_sleep_out()
diff --git a/lvgl_tft/Kconfig b/lvgl_tft/Kconfig
index d206393..01bb4ba 100644
--- a/lvgl_tft/Kconfig
+++ b/lvgl_tft/Kconfig
@@ -744,11 +744,11 @@ menu "LVGL TFT Display controller"
 
         config LV_DISP_ST7789_SOFT_RESET
             bool "Soft reset - use software reset instead of reset pin"
-            depends on LV_TFT_DISPLAY_CONTROLLER_ST7789            
+            depends on LV_TFT_DISPLAY_CONTROLLER_ST7789
             default n
             help
                 Use software reset and ignores configured reset pin (some hardware does not use a reset pin).
-    
+
     endmenu
 
     # menu will be visible only when LV_PREDEFINED_DISPLAY_NONE is y
diff --git a/lvgl_tft/il3820.c b/lvgl_tft/il3820.c
index 80358b2..fee39e2 100644
--- a/lvgl_tft/il3820.c
+++ b/lvgl_tft/il3820.c
@@ -73,9 +73,9 @@ static uint8_t il3820_lut_initial[] = {
     0x00, 0x00, 0x00, 0x00, 0x00, 0x00
 };
 static uint8_t il3820_lut_default[] = {
-    0x10, 0x18, 0x18, 0x08, 0x18, 0x18, 
-    0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 
-    0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 
+    0x10, 0x18, 0x18, 0x08, 0x18, 0x18,
+    0x08, 0x00, 0x00, 0x00, 0x00, 0x00,
+    0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
     0x00, 0x00, 0x13, 0x14, 0x44, 0x12,
     0x00, 0x00, 0x00, 0x00, 0x00, 0x00
 };
@@ -113,7 +113,7 @@ void il3820_flush(lv_disp_drv_t *drv, const lv_area_t *area, lv_color_t *color_m
     uint8_t *buffer = (uint8_t*) color_map;
     uint16_t x_addr_counter = 0;
     uint16_t y_addr_counter = 0;
-    
+
     /* Configure entry mode  */
     il3820_write_cmd(IL3820_CMD_ENTRY_MODE, &il3820_scan_mode, 1);
 
@@ -131,7 +131,7 @@ void il3820_flush(lv_disp_drv_t *drv, const lv_area_t *area, lv_color_t *color_m
     il3820_set_cursor(x_addr_counter, y_addr_counter);
 
     il3820_send_cmd(IL3820_CMD_WRITE_RAM);
-    
+
     /* Write the pixel data to graphic RAM, linelen bytes at the time. */
     for(size_t row = 0; row <= (EPD_PANEL_HEIGHT - 1); row++){
 	il3820_send_data(buffer, linelen);
@@ -139,7 +139,7 @@ void il3820_flush(lv_disp_drv_t *drv, const lv_area_t *area, lv_color_t *color_m
     }
 
     il3820_set_window(0, EPD_PANEL_WIDTH - 1, 0, EPD_PANEL_HEIGHT - 1);
-    
+
     il3820_update_display();
 
     /* IMPORTANT!!!
@@ -152,7 +152,7 @@ void il3820_flush(lv_disp_drv_t *drv, const lv_area_t *area, lv_color_t *color_m
  * BIT_SET(byte_index, bit_index) clears the bit_index pixel at byte_index of
  * the display buffer.
  * BIT_CLEAR(byte_index, bit_index) sets the bit_index pixel at the byte_index
- * of the display buffer. */ 		
+ * of the display buffer. */
 void il3820_set_px_cb(lv_disp_drv_t * disp_drv, uint8_t* buf,
     lv_coord_t buf_w, lv_coord_t x, lv_coord_t y,
     lv_color_t color, lv_opa_t opa)
@@ -217,7 +217,7 @@ void il3820_init(void)
 
     /* Software reset */
     il3820_write_cmd(IL3820_CMD_SW_RESET, NULL, 0);
-    
+
     /* Busy wait for the BUSY signal to go low */
     il3820_waitbusy(IL3820_WAIT);
 
@@ -245,10 +245,10 @@ void il3820_init(void)
 
     // allow partial updates now
     il3820_partial = true;
-    
+
     /* Update LUT */
     il3820_write_cmd(IL3820_CMD_UPDATE_LUT, il3820_lut_default, sizeof(il3820_lut_default));
-    
+
     /* Clear control memory and update */
     il3820_clear_cntlr_mem(IL3820_CMD_WRITE_RAM, true);
 }
@@ -257,10 +257,10 @@ void il3820_init(void)
 void il3820_sleep_in(void)
 {
     uint8_t data[] = {0x01};
-    
+
     /* Wait for the BUSY signal to go low */
     il3820_waitbusy(IL3820_WAIT);
-    
+
     il3820_write_cmd(IL3820_CMD_SLEEP_MODE, data, 1);
 }
 
@@ -270,15 +270,15 @@ static void il3820_waitbusy(int wait_ms)
     int i = 0;
 
     vTaskDelay(10 / portTICK_RATE_MS); // 10ms delay
-    
+
     for(i = 0; i < (wait_ms * 10); i++) {
 	if(gpio_get_level(IL3820_BUSY_PIN) != IL3820_BUSY_LEVEL) {
             return;
         }
-	
+
         vTaskDelay(10 / portTICK_RATE_MS);
     }
-    
+
     ESP_LOGE( TAG, "busy exceeded %dms", i*10 );
 }
 
@@ -294,10 +294,10 @@ static inline void il3820_data_mode(void)
     gpio_set_level(IL3820_DC_PIN, 1);
 }
 
-static inline void il3820_write_cmd(uint8_t cmd, uint8_t *data, size_t len) 
+static inline void il3820_write_cmd(uint8_t cmd, uint8_t *data, size_t len)
 {
     disp_wait_for_pending_transactions();
-    
+
     il3820_command_mode();
     disp_spi_send_data(&cmd, 1);
 
@@ -308,10 +308,10 @@ static inline void il3820_write_cmd(uint8_t cmd, uint8_t *data, size_t len)
 }
 
 /* Send cmd to the display */
-static inline void il3820_send_cmd(uint8_t cmd) 
+static inline void il3820_send_cmd(uint8_t cmd)
 {
     disp_wait_for_pending_transactions();
-    
+
     il3820_command_mode();
     disp_spi_send_data(&cmd, 1);
 }
@@ -320,14 +320,14 @@ static inline void il3820_send_cmd(uint8_t cmd)
 static void il3820_send_data(uint8_t *data, uint16_t length)
 {
     disp_wait_for_pending_transactions();
-    
+
     il3820_data_mode();
     disp_spi_send_colors(data, length);
 }
 
 /* Specify the start/end positions of the window address in the X and Y
  * directions by an address unit.
- * 
+ *
  * @param sx: X Start position.
  * @param ex: X End position.
  * @param ys: Y Start position.
@@ -336,7 +336,7 @@ static void il3820_send_data(uint8_t *data, uint16_t length)
 static inline void il3820_set_window( uint16_t sx, uint16_t ex, uint16_t ys, uint16_t ye)
 {
     uint8_t tmp[4] = {0};
-	
+
     tmp[0] = sx / 8;
     tmp[1] = ex / 8;
 
@@ -384,7 +384,7 @@ static void il3820_update_display(void)
     } else {
 	tmp =  (IL3820_CTRL2_ENABLE_CLK | IL3820_CTRL2_ENABLE_ANALOG | IL3820_CTRL2_TO_PATTERN);
     }
-    
+
     il3820_write_cmd(IL3820_CMD_UPDATE_CTRL2, &tmp, 1);
 
     il3820_write_cmd(IL3820_CMD_MASTER_ACTIVATION, NULL, 0);
@@ -400,10 +400,10 @@ static void il3820_clear_cntlr_mem(uint8_t ram_cmd, bool update)
     /* Arrays used by SPI must be word alligned */
     WORD_ALIGNED_ATTR uint8_t clear_page[IL3820_COLUMNS];
     memset(clear_page, 0xff, sizeof clear_page);
-    
+
     /* Configure entry mode */
     il3820_write_cmd(IL3820_CMD_ENTRY_MODE, &il3820_scan_mode, 1);
-    
+
     /* Configure the window */
     il3820_set_window(0, EPD_PANEL_WIDTH - 1, 0, EPD_PANEL_HEIGHT - 1);
 
diff --git a/lvgl_tft/ili9486.c b/lvgl_tft/ili9486.c
index dd82ac9..166bef8 100644
--- a/lvgl_tft/ili9486.c
+++ b/lvgl_tft/ili9486.c
@@ -60,8 +60,8 @@ void ili9486_init(void)
 		{0xE0, {0x0F, 0x1F, 0x1C, 0x0C, 0x0F, 0x08, 0x48, 0x98, 0x37, 0x0A, 0x13, 0x04, 0x11, 0x0D, 0x00}, 15},
 		{0XE1, {0x0F, 0x32, 0x2E, 0x0B, 0x0D, 0x05, 0x47, 0x75, 0x37, 0x06, 0x10, 0x03, 0x24, 0x20, 0x00}, 15},
 		{0x20, {0}, 0},				/* display inversion OFF */
-		{0x36, {0x48}, 1},	
-		{0x29, {0}, 0x80},			/* display on */	
+		{0x36, {0x48}, 1},
+		{0x29, {0}, 0x80},			/* display on */
 		{0x00, {0}, 0xff},
 	};
 
@@ -140,7 +140,7 @@ void ili9486_flush(lv_disp_drv_t * drv, const lv_area_t * area, lv_color_t * col
 	ili9486_send_cmd(0x2C);
 
 	size = lv_area_get_width(area) * lv_area_get_height(area);
-	
+
     ili9486_send_color((void*) color_map, size * 2);
 }
 
diff --git a/lvgl_tft/ili9488.c b/lvgl_tft/ili9488.c
index 5379b77..ce8bba0 100644
--- a/lvgl_tft/ili9488.c
+++ b/lvgl_tft/ili9488.c
@@ -50,7 +50,7 @@ static void ili9488_send_color(void * data, uint16_t length);
 /**********************
  *   GLOBAL FUNCTIONS
  **********************/
-// From github.com/jeremyjh/ESP32_TFT_library 
+// From github.com/jeremyjh/ESP32_TFT_library
 // From github.com/mvturnho/ILI9488-lvgl-ESP32-WROVER-B
 void ili9488_init(void)
 {
@@ -102,7 +102,7 @@ void ili9488_init(void)
 	// Exit sleep
 	ili9488_send_cmd(0x01);	/* Software reset */
 	vTaskDelay(100 / portTICK_RATE_MS);
-	
+
 	//Send all the commands
 	uint16_t cmd = 0;
 	while (ili_init_cmds[cmd].databytes!=0xff) {
@@ -151,7 +151,7 @@ void ili9488_flush(lv_disp_drv_t * drv, const lv_area_t * area, lv_color_t * col
 	    (uint8_t) (area->x2 >> 8) & 0xFF,
 	    (uint8_t) (area->x2) & 0xFF,
 	};
-	
+
 	/* Page addresses  */
 	uint8_t yb[] = {
 	    (uint8_t) (area->y1 >> 8) & 0xFF,