Update epdiy driver using it standalone, without CalEPD. Previous is not epdiy_cale.cpp

lvgl_tft/epdiy_epaper.cpp

@@ -4,63 +4,93 @@
 
 #include "epdiy_epaper.h"
 
-// NOTE: This needs Epdiy component https://github.com/vroland/epdiy
+#include "epd_driver.h"
-// Run idf.py menuconfig-> Component Config -> E-Paper driver and select:
+#include "epd_highlevel.h"
-// Display type: LILIGO 4.7 ED047TC1
-// Board: LILIGO T5-4.7 Epaper
-// In the same section Component Config -> ESP32 Specifics -> Enable PSRAM
-#include "parallel/ED047TC1.h"
-Ed047TC1 display;
 
 /*********************
  *      DEFINES
  *********************/
 #define TAG "EPDIY"
-
+EpdiyHighlevelState hl;
 uint16_t flushcalls = 0;
+uint8_t * framebuffer;
+uint8_t temperature = 25;
 
 /* Display initialization routine */
 void epdiy_init(void)
 {
-    printf("epdiy_init\n");
+    epd_init(EPD_OPTIONS_DEFAULT);
-    display.init();
+    hl = epd_hl_init(EPD_BUILTIN_WAVEFORM);
-    display.setRotation(0);
+    framebuffer = epd_hl_get_framebuffer(&hl);    
-    display.clearScreen();
+    epd_fullclear(&hl, temperature);
+    epd_poweron();
 }
 
+uint16_t xo = 0;
+uint16_t yo = 0;
+
 /* Required by LVGL */
 void epdiy_flush(lv_disp_drv_t *drv, const lv_area_t *area, lv_color_t *color_map)
 {
     ++flushcalls;
-    printf("epdiy_flush %d x:%d y:%d w:%d h:%d\n", flushcalls,area->x1,area->y1,lv_area_get_width(area),lv_area_get_height(area));
+    xo = area->x1;
+    yo = area->y1;
+    uint16_t w = lv_area_get_width(area);
+    uint16_t h = lv_area_get_height(area);
 
-    // Full update
+    EpdRect update_area = {
-    if (lv_area_get_width(area)==display.width() && lv_area_get_height(area)==display.height()) {
+        .x = xo,
-      display.update();
+        .y = yo,
-    } else {
+        .width = w,
-      // Partial update: Looks nice but should find a way to clear that area first. Mode: MODE_EPDIY_WHITE_TO_GL16
+        .height = h,
-      display.updateWindow(area->x1,area->y1,lv_area_get_width(area),lv_area_get_height(area),MODE_GC16);
+    };
-    }
+
-    
+    // Debug test: Draw box x:232 y:78 w:496 h:198. Flush coords are correct:
-    /* IMPORTANT!!!
+    /* EpdRect rect_area = {
-     * Inform the graphics library that you are ready with the flushing */
+        .x = 232,
+        .y = 78,
+        .width = 496,
+        .height = 198,
+    };
+    epd_draw_rect(rect_area, 0, framebuffer); */
+    epd_hl_update_area(&hl, MODE_GC16, temperature, update_area); //update_area
+
+    printf("epdiy_flush %d x:%d y:%d w:%d h:%d\n", flushcalls,xo,yo,w,h);
+    /* Inform the graphics library that you are ready with the flushing */
     lv_disp_flush_ready(drv);
 }
 
-/* Called for each pixel */
+/* 
+ * Called for each pixel. Designed with the idea to fill the buffer directly, not to set each pixel, see:
+ * https://forum.lvgl.io/t/lvgl-port-to-be-used-with-epaper-displays/5630/3
+*/
 void epdiy_set_px_cb(lv_disp_drv_t * disp_drv, uint8_t* buf,
     lv_coord_t buf_w, lv_coord_t x, lv_coord_t y,
     lv_color_t color, lv_opa_t opa)
 {
-    // Is printing Y axis only till 40 px: And flushing too many times
+    // Debug where x y is printed, not all otherwise is too much Serial
-    //printf("%d ", (int16_t)y); // Works and prints "Hello world"
+    /* if ((int16_t)y%10==0 && flushcalls>0){
-    //printf("%d ",(int16_t)color.full); // Debug colors
+        if ((int16_t)x%2==0){
+            printf("x%d y%d\n", (int16_t)x, (int16_t)y);
+        }
+    }
+    */
+
     // Test using RGB232
-    int16_t epd_color = EPD_WHITE;
+    int16_t epd_color = 255;
 
     // Color setting use: RGB232
     if ((int16_t)color.full<250) {
         epd_color = (int16_t)color.full/3;
     }
-    display.drawPixel((int16_t)x, (int16_t)y, epd_color);
+
+    int16_t x1 = (int16_t)x;
+    int16_t y1 = (int16_t)y;
+    // Add offsets from last flush test. Why is drawing in wrong place?
+    // Bad idea: But is just writing in different area. And I don't understand why:
+    /* if (flushcalls>0) {
+        x1 = x1 + xo;
+        y1 = y1 + yo;
+    } */
+    epd_draw_pixel(x1, y1, epd_color, framebuffer);
 }