fix spi names

This commit is contained in:
Tomas Rezucha 2021-12-16 13:36:23 +01:00
parent 4afc03a9fa
commit 22ba4161b5
5 changed files with 30 additions and 59 deletions

4
.gitignore vendored
View file

@ -56,3 +56,7 @@ dkms.conf
# ESP-IDF build dir
build
# Kconfig files
sdkconfig
sdkconfig.old

View file

@ -154,34 +154,12 @@ bool lvgl_spi_driver_init(int host,
int dma_channel,
int quadwp_pin, int quadhd_pin)
{
int dma_chan = 0 /* SPI_DMA_DISABLED */;
#if defined (CONFIG_IDF_TARGET_ESP32)
assert((SPI_HOST <= host) && (VSPI_HOST >= host));
const char *spi_names[] = {
"SPI_HOST", "HSPI_HOST", "VSPI_HOST"
};
dma_chan = dma_channel;
#elif defined (CONFIG_IDF_TARGET_ESP32S2)
assert((SPI_HOST <= host) && (HSPI_HOST >= host));
const char *spi_names[] = {
"SPI_HOST", "", ""
};
dma_chan = dma_channel;
#elif defined (CONFIG_IDF_TARGET_ESP32C3)
assert((SPI1_HOST <= host) && (SPI3_HOST >= host));
assert((0 <= host) && (SPI_HOST_MAX > host));
const char *spi_names[] = {
"SPI1_HOST", "SPI2_HOST", "SPI3_HOST"
};
dma_chan = 3 /* SPI_DMA_CH_AUTO */;
#else
#error "Target chip not selected"
#endif
ESP_LOGI(TAG, "Configuring SPI host %s (%d)", spi_names[host], host);
ESP_LOGI(TAG, "Configuring SPI host %s", spi_names[host]);
ESP_LOGI(TAG, "MISO pin: %d, MOSI pin: %d, SCLK pin: %d, IO2/WP pin: %d, IO3/HD pin: %d",
miso_pin, mosi_pin, sclk_pin, quadwp_pin, quadhd_pin);
@ -189,17 +167,16 @@ bool lvgl_spi_driver_init(int host,
spi_bus_config_t buscfg = {
.miso_io_num = miso_pin,
.mosi_io_num = mosi_pin,
.sclk_io_num = sclk_pin,
.quadwp_io_num = quadwp_pin,
.quadhd_io_num = quadhd_pin,
.mosi_io_num = mosi_pin,
.sclk_io_num = sclk_pin,
.quadwp_io_num = quadwp_pin,
.quadhd_io_num = quadhd_pin,
.max_transfer_sz = max_transfer_sz
};
ESP_LOGI(TAG, "Initializing SPI bus...");
esp_err_t ret = spi_bus_initialize(host, &buscfg, dma_chan);
esp_err_t ret = spi_bus_initialize(host, &buscfg, (spi_dma_chan_t)dma_channel);
assert(ret == ESP_OK);
return ESP_OK != ret;
}

View file

@ -64,9 +64,7 @@ extern "C" {
#define ENABLE_TOUCH_INPUT CONFIG_LV_ENABLE_TOUCH
#if defined (CONFIG_LV_TFT_DISPLAY_SPI1_HOST)
#define TFT_SPI_HOST SPI1_HOST
#elif defined (CONFIG_LV_TFT_DISPLAY_SPI2_HOST)
#if defined (CONFIG_LV_TFT_DISPLAY_SPI2_HOST)
#define TFT_SPI_HOST SPI2_HOST
#elif defined (CONFIG_LV_TFT_DISPLAY_SPI3_HOST)
#define TFT_SPI_HOST SPI3_HOST
@ -86,12 +84,10 @@ extern "C" {
#define DISP_SPI_TRANS_MODE_SIO
#endif
#if defined (CONFIG_LV_TOUCH_CONTROLLER_SPI_HSPI)
#define TOUCH_SPI_HOST HSPI_HOST
#elif defined (CONFIG_LV_TOUCH_CONTROLLER_SPI_VSPI)
#define TOUCH_SPI_HOST VSPI_HOST
#elif defined (CONFIG_LV_TOUCH_CONTROLLER_SPI_FSPI)
#define TOUCH_SPI_HOST FSPI_HOST
#if defined (CONFIG_LV_TOUCH_CONTROLLER_SPI2_HOST)
#define TOUCH_SPI_HOST SPI2_HOST
#elif defined (CONFIG_LV_TOUCH_CONTROLLER_SPI3_HOST)
#define TOUCH_SPI_HOST SPI3_HOST
#endif
/* Handle the FT81X Special case */
@ -107,7 +103,7 @@ extern "C" {
// Detect the use of a shared SPI Bus and verify the user specified the same SPI bus for both touch and tft
#if defined (CONFIG_LV_TOUCH_DRIVER_PROTOCOL_SPI) && TP_SPI_MOSI == DISP_SPI_MOSI && TP_SPI_CLK == DISP_SPI_CLK
#if TFT_SPI_HOST != TOUCH_SPI_HOST
#error You must specify the same SPI host (HSPI, VSPI or FSPI) for both display and touch driver
#error You must specify the same SPI host (SPIx_HOST) for both display and touch driver
#endif
#define SHARED_SPI_BUS

View file

@ -469,13 +469,10 @@ menu "LVGL TFT Display controller"
choice
prompt "TFT SPI Bus." if LV_TFT_DISPLAY_PROTOCOL_SPI
default LV_TFT_DISPLAY_SPI3_HOST if LV_PREDEFINED_DISPLAY_TTGO && \
!IDF_TARGET_ESP32S2
default LV_TFT_DISPLAY_SPI2_HOST
help
Select the SPI Bus the TFT Display is attached to.
config LV_TFT_DISPLAY_SPI1_HOST
bool "SPI1_HOST"
config LV_TFT_DISPLAY_SPI2_HOST
bool "SPI2_HOST"
config LV_TFT_DISPLAY_SPI3_HOST

View file

@ -67,17 +67,14 @@ menu "LVGL Touch controller"
prompt "Touch Controller SPI Bus."
depends on LV_TOUCH_DRIVER_PROTOCOL_SPI
default LV_TOUCH_CONTROLLER_SPI_VSPI if !IDF_TARGET_ESP32S2
default LV_TOUCH_CONTROLLER_SPI_FSPI if IDF_TARGET_ESP32S2
default LV_TOUCH_CONTROLLER_SPI2_HOST
help
Select the SPI Bus the TFT Display is attached to.
Select the SPI Bus the touch controller is attached to.
config LV_TOUCH_CONTROLLER_SPI_HSPI
bool "HSPI"
config LV_TOUCH_CONTROLLER_SPI_VSPI
bool "VSPI" if !IDF_TARGET_ESP32S2
config LV_TOUCH_CONTROLLER_SPI_FSPI
bool "FSPI" if IDF_TARGET_ESP32S2
config LV_TOUCH_CONTROLLER_SPI2_HOST
bool "SPI2_HOST"
config LV_TOUCH_CONTROLLER_SPI3_HOST
bool "SPI3_HOST"
endchoice
menu "Touchpanel (XPT2046) Pin Assignments"