lvgl_esp32_drivers/lvgl_tft/st7789.c
C47D d79b68bdf6 ST7789: Cleanup
Remove logging and unneccesary includes
2021-09-14 19:13:35 -05:00

227 lines
6.4 KiB
C

/**
* @file st7789.c
*
* Mostly taken from lbthomsen/esp-idf-littlevgl github.
*/
#include "st7789.h"
#include "disp_spi.h"
#include "display_hal.h"
/*********************
* DEFINES
*********************/
#define TAG "ST7789"
/**********************
* TYPEDEFS
**********************/
/*The LCD needs a bunch of command/argument values to be initialized. They are stored in this struct. */
typedef struct {
uint8_t cmd;
uint8_t data[16];
uint8_t databytes; //No of data in data; bit 7 = delay after set; 0xFF = end of cmds.
} lcd_init_cmd_t;
/**********************
* STATIC PROTOTYPES
**********************/
static void st7789_set_orientation(lv_disp_drv_t *drv, uint8_t orientation);
static void st7789_send_cmd(lv_disp_drv_t * drv, uint8_t cmd);
static void st7789_send_data(lv_disp_drv_t * drv, void *data, uint16_t length);
static void st7789_send_color(lv_disp_drv_t * drv, void *data, uint16_t length);
static void st7789_reset(lv_disp_drv_t * drv);
/**********************
* STATIC VARIABLES
**********************/
/**********************
* MACROS
**********************/
/**********************
* GLOBAL FUNCTIONS
**********************/
void st7789_init(lv_disp_drv_t *drv)
{
lcd_init_cmd_t st7789_init_cmds[] = {
{0xCF, {0x00, 0x83, 0X30}, 3},
{0xED, {0x64, 0x03, 0X12, 0X81}, 4},
{ST7789_PWCTRL2, {0x85, 0x01, 0x79}, 3},
{0xCB, {0x39, 0x2C, 0x00, 0x34, 0x02}, 5},
{0xF7, {0x20}, 1},
{0xEA, {0x00, 0x00}, 2},
{ST7789_LCMCTRL, {0x26}, 1},
{ST7789_IDSET, {0x11}, 1},
{ST7789_VCMOFSET, {0x35, 0x3E}, 2},
{ST7789_CABCCTRL, {0xBE}, 1},
{ST7789_MADCTL, {0x00}, 1}, // Set to 0x28 if your display is flipped
{ST7789_COLMOD, {0x55}, 1},
#if ST7789_INVERT_COLORS == 1
{ST7789_INVON, {0}, 0}, // set inverted mode
#else
{ST7789_INVOFF, {0}, 0}, // set non-inverted mode
#endif
{ST7789_RGBCTRL, {0x00, 0x1B}, 2},
{0xF2, {0x08}, 1},
{ST7789_GAMSET, {0x01}, 1},
{ST7789_PVGAMCTRL, {0xD0, 0x00, 0x02, 0x07, 0x0A, 0x28, 0x32, 0x44, 0x42, 0x06, 0x0E, 0x12, 0x14, 0x17}, 14},
{ST7789_NVGAMCTRL, {0xD0, 0x00, 0x02, 0x07, 0x0A, 0x28, 0x31, 0x54, 0x47, 0x0E, 0x1C, 0x17, 0x1B, 0x1E}, 14},
{ST7789_CASET, {0x00, 0x00, 0x00, 0xEF}, 4},
{ST7789_RASET, {0x00, 0x00, 0x01, 0x3f}, 4},
{ST7789_RAMWR, {0}, 0},
{ST7789_GCTRL, {0x07}, 1},
{0xB6, {0x0A, 0x82, 0x27, 0x00}, 4},
{ST7789_SLPOUT, {0}, 0x80},
{ST7789_DISPON, {0}, 0x80},
{0, {0}, 0xff},
};
st7789_reset(drv);
//Send all the commands
uint16_t cmd = 0;
while (st7789_init_cmds[cmd].databytes!=0xff) {
st7789_send_cmd(drv, st7789_init_cmds[cmd].cmd);
st7789_send_data(drv, st7789_init_cmds[cmd].data, st7789_init_cmds[cmd].databytes&0x1F);
if (st7789_init_cmds[cmd].databytes & 0x80) {
display_hal_delay(drv, 100);
}
cmd++;
}
st7789_enable_backlight(drv, true);
/* FIXME We're setting up the initial orientation in the cmd array */
st7789_set_orientation(drv, ST7789_INITIAL_ORIENTATION);
}
void st7789_enable_backlight(lv_disp_drv_t *drv, bool backlight)
{
#if ST7789_ENABLE_BACKLIGHT_CONTROL
uint32_t tmp = 0;
#if (ST7789_BCKL_ACTIVE_LVL==1)
tmp = backlight ? 1 : 0;
#else
tmp = backlight ? 0 : 1;
#endif
display_hal_backlight(drv, tmp);
#endif
}
/* The ST7789 display controller can drive 320*240 displays, when using a 240*240
* display there's a gap of 80px, we need to edit the coordinates to take into
* account that gap, this is not necessary in all orientations. */
void st7789_flush(lv_disp_drv_t * drv, const lv_area_t * area, lv_color_t * color_map)
{
uint8_t data[4] = {0};
uint16_t offsetx1 = area->x1;
uint16_t offsetx2 = area->x2;
uint16_t offsety1 = area->y1;
uint16_t offsety2 = area->y2;
uint32_t size = lv_area_get_width(area) * lv_area_get_height(area);
#if (CONFIG_LV_TFT_DISPLAY_OFFSETS)
offsetx1 += CONFIG_LV_TFT_DISPLAY_X_OFFSET;
offsetx2 += CONFIG_LV_TFT_DISPLAY_X_OFFSET;
offsety1 += CONFIG_LV_TFT_DISPLAY_Y_OFFSET;
offsety2 += CONFIG_LV_TFT_DISPLAY_Y_OFFSET;
#elif (LV_HOR_RES_MAX == 240) && (LV_VER_RES_MAX == 240)
#if (CONFIG_LV_DISPLAY_ORIENTATION_PORTRAIT)
offsetx1 += 80;
offsetx2 += 80;
#elif (CONFIG_LV_DISPLAY_ORIENTATION_LANDSCAPE_INVERTED)
offsety1 += 80;
offsety2 += 80;
#endif
#endif
/*Column addresses*/
st7789_send_cmd(drv, ST7789_CASET);
data[0] = (offsetx1 >> 8) & 0xFF;
data[1] = offsetx1 & 0xFF;
data[2] = (offsetx2 >> 8) & 0xFF;
data[3] = offsetx2 & 0xFF;
st7789_send_data(drv, data, 4);
/*Page addresses*/
st7789_send_cmd(drv, ST7789_RASET);
data[0] = (offsety1 >> 8) & 0xFF;
data[1] = offsety1 & 0xFF;
data[2] = (offsety2 >> 8) & 0xFF;
data[3] = offsety2 & 0xFF;
st7789_send_data(drv, data, 4);
/*Memory write*/
st7789_send_cmd(drv, ST7789_RAMWR);
st7789_send_color(drv, (void*) color_map, size * 2);
}
/**********************
* STATIC FUNCTIONS
**********************/
static void st7789_send_cmd(lv_disp_drv_t *drv, uint8_t cmd)
{
disp_wait_for_pending_transactions();
display_hal_gpio_dc(drv, 0);
disp_spi_send_data(&cmd, 1);
}
static void st7789_send_data(lv_disp_drv_t *drv, void * data, uint16_t length)
{
disp_wait_for_pending_transactions();
display_hal_gpio_dc(drv, 1);
disp_spi_send_data(data, length);
}
static void st7789_send_color(lv_disp_drv_t *drv, void * data, uint16_t length)
{
disp_wait_for_pending_transactions();
display_hal_gpio_dc(drv, 1);
disp_spi_send_colors(data, length);
}
/* Reset the display, if we don't have a reset pin we use software reset */
static void st7789_reset(lv_disp_drv_t *drv)
{
#if !defined(CONFIG_LV_DISP_ST7789_SOFT_RESET)
display_hal_gpio_rst(drv, 0);
display_hal_delay(drv, 100);
display_hal_gpio_rst(drv, 1);
display_hal_delay(drv, 100);
#else
st7789_send_cmd(drv, ST7789_SWRESET);
#endif
}
static void st7789_set_orientation(lv_disp_drv_t *drv, uint8_t orientation)
{
uint8_t data[] =
{
#if CONFIG_LV_PREDEFINED_DISPLAY_TTGO
0x60, 0xA0, 0x00, 0xC0
#else
0xC0, 0x00, 0x60, 0xA0
#endif
};
st7789_send_cmd(drv, ST7789_MADCTL);
st7789_send_data(drv, (void *) &data[orientation], 1);
}
/* Display update callback, we could update the orientation in here */
void st7789_update_cb(lv_disp_drv_t *drv)
{
(void) drv;
}